Item # 3132-436 On Schaerges & Vossler Pump Co.

Products

Request Information

Unit of Measure

Manufacturer	N/A Crane
Pump Classification	N/A Deming Pumps
Series	N/A B
Size	N/A 4 x 3 x 6
Type	N/A 2B
Suction	N/A 4 in
Discharge	N/A 3 in
Casing Wall Thickness	N/A 5/16 in
Max. Impeller Diameter	N/A 6 1/2 in
Impeller Design	N/A Enclosed
Impeller Eye Area Inches	N/A 11.04 in²
Max. Solids	N/A 7/8 in
Shaft Diameter at Coupling End	N/A 1 1/8 in
Shaft Diameter at Impeller	N/A 1 1/4 in
Bearing Size (IB/OB)	N/A 6308/5308
Bearing CL to Bearing CL	N/A 6 in
Bearing CL to Impeller CL	N/A 8 1/8 in
Shaft Diameter Under Sleeve	N/A 1 3/8 in
Shaft Sleeve OD	N/A 1 5/8 in
Pump Weight¹	N/A 300

N/A

Liquid end - Top centerline back pull-out design allows disassembly without disturbing the suction and/or discharge piping. Three-piece construction.
Casing - Suction head and casing are one-piece casting. Top centerline discharge connection. Rotated at 45-degree intervals through 360 degrees. 316 stainless steel casing wearing rings are standard.
Impeller - Enclosed type, statically and hydraulically balanced for optimum performance. Straight bore design for interchangeability on both frame and close-coupled designs.
Impeller wearing rings are optional on enclosed impeller.
Packing/seal-head assembly - Adaptable from standard packing to a variety of mechanical seals.
Adapter - Motor/frame support.
Shaft Sleeve - Hooked style for maximum drive and 316 stain less steel for serviceability.
Motor - Close-coupled JP Frame.