Item # 3131-328 On Schaerges & Vossler Pump Co.

Products

Request Information

Unit of Measure

Manufacturer	N/A Crane
Pump Classification	N/A Deming Pumps
Series	N/A B
Size	N/A 3 x 2 x 8
Type	N/A 1B
Suction	N/A 3 in
Discharge	N/A 2 in
Casing Wall Thickness	N/A 5/16 in
Max. Impeller Diameter	N/A 8 in
Impeller Design	N/A Enclosed
Impeller Eye Area Inches	N/A 7.07 in²
Max. Solids	N/A 7/16 in
Shaft Diameter at Coupling End	N/A 7/8 in
Shaft Diameter at Impeller	N/A 7/8 in
Bearing Size (IB/OB)	N/A 3207/5306
Bearing CL to Bearing CL	N/A 4 1/4 in
Bearing CL to Impeller CL	N/A 6 1/4 in
Shaft Diameter Under Sleeve	N/A 1 in
Shaft Sleeve OD	N/A 1 1/4 in
Pump Weight¹	N/A 82

N/A

Frame - Heavy duty cast-iron construction. Adaptable for either grease or oil lubrication.
Rotating element - Totally adjustable by use of the micrometer adjustment housing on the thrust bearing.
Shaft - Heavy 4 HO Steel.
Shaft sleeve - Hooked style for maximum drive and 316 stainless steel for serviceability.
Liquid end - Top centerline back pull-out design allows disassembly without disturbing the suction and/or discharge piping. Three-piece construction.
Casing - Suction head and casing are one-piece casting. Top centerline discharge connection. Rotated at 45-degree intervals through 360 degrees. 316 stainless steel casing wearing rings are standard.
Impeller - Enclosed and/or semi-enclosed types, statically and hydraulically balanced for optimum performance. Straight bore design for interchangeability on both frame and close-coupled designs.
Impeller wearing rings - Optional on enclosed impellers.
Adapter assembly - Combination motor/frame support and seal housing.